According to Microsoft, Windows 10 has around million active users to date, making it four times more popular than Mac. However, nothing in this world can be absolutely perfect.

So, like many other new technologies, Windows 10 can run into some bugs and problems that are quite challenging to solve. The operating system is riddled with glitches and issues, including one that affects the reset process. In this article, we will show you several ways to resolve that problem.

One of the ways to fix this issue is to run the Startup Repair. Before proceeding, you need to download the Media Creation Tool and create a bootable media.

When the factory reset gets stuck, one of your best options is to simply wait it out. Several factors can cause this issue. If your hard drive LED indicator is still blinking, then it means the reset process is still running. In this case, you just need to wait for it to complete. Many users reported that this can take several hours.

You might even need to leave your computer running overnight to ensure that the process finishes completely. Your computer might have gotten stuck after downloading some updates. To resolve the problem, you need to disable your Internet connection. Simply unplug the Ethernet cable from your computer or switch off your wireless router. The issue might have something to do with your BIOS settings. It is possible that some features are interfering with your system, disrupting the factory reset process.

To resolve this problem, you need to go to your BIOS settings and perform the following:. Try performing a factory reset and see if you can now complete it successfully. However, before you do that, we strongly advise that you create a backup of your files. Keep in mind that this solution will remove all the files in your C drive. If you have your bootable disc or USB flash drive ready, you can proceed to these steps:.

Note: You might need to go to your BIOS settings to change the boot order, ensuring that the installation media is at the top of the options. Note: Typically, this is the System and Primary drive. However, that is not always the case. Keep in mind that if you choose the wrong drive, you will end up formatting it and removing all the files it contains.

Moreover, you will have two versions of the operating system on your computer. So, it is important that you take precautions, ensuring that you are selecting the drive with Windows. After finishing the installation, the problem should be resolved. Remember that this is a drastic solution. That said, you should only use this method if the other solutions did not work for you. Pro Tip: If you decided to perform a Windows 10 factory reset because your computer was intolerably slow, you should get to the bottom of the problem to prevent it from happening again.

In this case, we recommend installing a powerful tool that can consistently maintain the speed and performance of your PC. There are many programs out there that can perform this job, but you can truly rely on Auslogics BoostSpeed. Your email address will not be published. Ad blockers may interfere with some important blog features, such as comments, images, etc. Please consider disabling your ad blocker so you can have the best experience on this website. Eunice Samson 12 October – 5 min read.

Link copied. Do you like this post? You may also like 5. How to get rid of Windows Update error 0xf? Leave a Reply Cancel reply Your email address will not be published. Auslogics Blog.

Ad Blocker Detected Ad blockers may interfere with some important blog features, such as comments, images, etc. Got it. All personal data you provide to us is handled in accordance with applicable laws, including the European GDPR. Please see our Privacy Policy for more details. Great to see you among our subscribers!

 
 

 

Windows 10 factory reset from boot menu free download

 

Do you want a Windows 10 boot repair tool to repair your Windows? If your Windows PC cannot boot, refer to this article to get a powerful tool to repair it. My computer cannot boot suddenly! I used it yesterday, and it works well. But today, I start my computer and find Windows cannot boot. What should I do to repair it? Or is there a professional Windows 10 boot repair tool that can help? Any advice would be appreciated! If you encounter the problem that Windows 10 cannot boot, you may be puzzled about the reason of it.

Usually, the possible reasons of Windows cannot boot can be summarized as follows:. There is something wrong with the system disk maybe virus attack or bad sectors. At this time, you should use powerful anti-virus software to repair it. Or you might have to replace it with a new system disk. In this case, check your BIOS boot order to make sure the system hard drive as the first boot device.

With this Windows boot repair tool, you can create a bootable USB drive to access your Windows computer which cannot boot now, and then repair Windows 10 with the bootable USB drive. Other Notable Features: 1. User-friendly interface and easy to follow for computer experts and newbie; 2. Copy a specific partition to another partition or hard drive; 5. Therefore, it is a really reliable partition manager for Windows PC users.

Before proceeding, connect a blank USB drive to a working Windows 10 computer because your Windows 10 cannot boot and needs to be repaired. Step 1. Free download the Windows 10 boot repair tool on the normal Windows 10 PC, install and launch it as well. Step 2. Step 3. When it is done, you need to connect the bootable USB drive into the Windows 10 computer with boot issues. Enter BIOS settings to change boot order to make boot computer from it. Then you can do as below to repair Windows 10 with bootable USB.

Please choose proper MBR type according to your operating system. It cannot solve the problem that Windows cannot boot due to the loss of bootable file or system file. See, with this recommended Windows 10 boot repair tool, you can easily repair Windows 10 boot issues caused by corrupted MBR or bad sectors on boot partition.

Usually, the possible reasons of Windows cannot boot can be summarized as follows: There is something wrong with the system disk maybe virus attack or bad sectors.

Still Need Help? Have your problem been solved? If not, please input query in the search box below.

 
 

How to perform a clean boot in Windows – Boot Windows 10 in Recovery Mode

 
 

Click a link below that corresponds to your version of Windows:. Windows 11, Windows Recovery options in Windows. Windows 8. A “clean boot” starts Windows with a minimal set of drivers and startup programs, so that you can determine whether a background program is interfering with your game or program. This is similar to starting Windows in Safe Mode , but provides you more control over which services and programs run at startup to help you isolate the cause of a problem.

These steps might look complicated at first glance, but following them in order, step-by-step, will help you get you back on track. Sign in to the computer as an administrator. If you are unsure if your account has administrator rights, see Create a local user or administrator account in Windows to find out how to see if your account has administrator rights, and grant them to your account, if necessary.

Select Search , type msconfig , and then select System Configuration from the list of results. Important: If the computer is connected to a network, network policy settings might prevent you from following these steps.

Only use the System Configuration utility to change the advanced boot options on the computer with guidance from a Microsoft support engineer. Using the System Configuration utility might make the computer unusable. Select Apply. On the Startup tab in Task Manager, for each Enabled startup item, select the item and then select Disable. Keep track of which items have been Disabled. You will need to know this later. When you restart the computer, it will be in a clean boot environment.

Follow troubleshooting steps to install, uninstall, or run your application. Your computer might temporarily lose some functionality while in a clean boot environment. Reset the computer to start normally after clean boot troubleshooting and resume functionality.

After you restart the computer, you’ll have a clean boot environment. Then, do one of the following, as appropriate for your situation:. Note: If you receive the “The Windows Installer service could not be accessed” error during the installation or uninstallation, you’ll need more information. See How to start the Windows Installer service when system services are not loaded.

Then install or uninstall the program or update again. If the installation or uninstallation is successful, your issue is resolved and you can start as you usually do.

How to reset the computer to start as usual. If the installation or uninstallation still fails, that means this issue is not caused by application or service interference. You might need to contact the program manufacturer for more specific support. If the program runs correctly, this issue is caused by application or service interference. You can find out which application or service is causing the issue.

How to determine what is causing the issue by performing a clean boot If the program still doesn’t run as expected, this issue is not caused by application or service interference. If your problem does not occur while the computer is in a clean boot environment, then you can determine which startup application or service is causing the problem by systematically turning them on or off and restarting the computer. While turning on a single service or startup item and rebooting each time will eventually find the problematic service or application, the most efficient way to do this is to test half of them at a time, thus eliminating half of the items as the potential cause with each reboot of the computer.

You can then repeat this process until you’ve isolated the problem. Here’s how:. Select Search , then type msconfig. Note: The option in Settings to go back to your previous version of Windows is only available for a limited time after upgrading. When the next preview build is ready, it’ll be installed on your PC. This option takes your PC back to an earlier point in time, called a system restore point.

Restore points are generated when you install a new app or driver, and when you create a restore point manually. In the search box on the taskbar, type control panel , and then choose it from the list of results. In the Control Panel search box, type recovery.

In the Restore system files and settings box, select Next. Select the restore point that you want to use in the list of results, and then select Scan for affected programs. In this scenario, you won’t be able to recovery your PC using a system restore point and will need to use one of the other recovery options listed on this page. You’ll see a list of items that will be deleted if you remove this restore point.

View update history settings. Right-click the update you want to remove, and then select Uninstall. Resetting reinstalls Windows 10, but lets you choose whether to keep your files or remove them, and then reinstalls Windows. To reinstall Windows 10 while Windows is running:.

To finish, select Install to start reinstalling Windows 10 on your PC. To reinstall Windows 10 by starting your PC using installation media:. If you have a Windows 10 product key, enter it when prompted. Note: If you suspect that your PC has been infected, consider deleting the existing partitions and reinstalling Windows 10 onto a clean disk.

Follow the steps to create installation media, and then select Finish. Note: If you go back to Windows 8. To fix the apps, reinstall them from the Microsoft Store. Under Go back to the previous version of Windows 10 , select Get Started.

In the Restore system files and setting box, select Next. If the Turn on system protection option is selected, continue with step 6. Refresh your PC to reinstall Windows and keep your personal files and settings. Refresh also keeps the apps that came with your PC and the apps you installed from the Microsoft Store.

Reset your PC to reinstall Windows but delete your files, settings, and apps—except for the apps that came with your PC. Restore your PC to undo recent system changes you’ve made. If you want to back up and restore your personal files using File History, see Set up a drive for File History. If your PC came with Windows 8.

Check the info that came with your PC to see if your PC manufacturer provided these discs or media. In some cases, you might have created them when you first set up your PC. For more info, see Create a USB recovery drive. If you upgraded your PC to Windows 8. If your PC isn’t performing as well as it once did, and you don’t know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Warning: Apps you installed from websites and DVDs will be removed. Apps that came with your PC and apps you installed from Microsoft Store will be reinstalled.

Windows puts a list of removed apps on your desktop after refreshing your PC. Swipe in from the right edge of the screen, tap Settings , and then tap Change PC settings. If you’re using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, select Settings , and then select Change PC settings. Tap or select Update and recovery , and then tap or select Recovery. Under Refresh your PC without affecting your files , tap or select Get started.

If you want to recycle your PC, give it away, or start over with it, you can reset it completely. This removes everything and reinstalls Windows. Warning: All of your personal files will be deleted and your settings will be reset. All apps that you installed will be removed.

Only apps that came with your PC will be reinstalled. Under Remove everything and reinstall Windows , tap or select Get started. Note: You’ll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software.

If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely. If you think an app or driver that you recently installed caused problems with your PC, you can restore Windows back to an earlier point in time, called a restore point. Windows automatically creates a restore point when you install desktop apps and new Windows updates, if the last restore point is older than 7 days. You can also create a restore point manually at any time.

Swipe in from the right edge of the screen, and then tap Search. If you’re using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then select Search. Note: You’ll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely.

If you think an app or driver that you recently installed caused problems with your PC, you can restore Windows back to an earlier point in time, called a restore point. Windows automatically creates a restore point when you install desktop apps and new Windows updates, if the last restore point is older than 7 days. You can also create a restore point manually at any time. Swipe in from the right edge of the screen, and then tap Search.

If you’re using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search. Enter Control Panel in the search box, and tap or click Control Panel. Enter Recovery in the Control Panel search box, and then tap or click Recovery. If you need additional help refreshing, resetting, or restoring your PC, check out the Repair and Recovery community pages in the Windows forum for solutions that other people have found for problems they’ve experienced.

Windows 8. Support for Windows 8. Need more help? Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve?