Praveen Jewellers

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Extended embed settings. You have already flagged this document. Thank you, for helping us keep this platform clean.

The editors will have a look at it as soon as possible. Self publishing. Share Embed Flag. TAGS adobe photoshop classroom download ebook digital editions conrad photographers registration. You also want an ePaper? His work with Adobe Systems started in , when they invited him to help develop the first Adobe Classroom in a Book. His recent digital painting work can be seen online at www. Now a freelance writer and editor, Conrad creates books and videos that teach Adobe Photoshop and Adobe Creative Cloud workflows.

He also writes articles for publications including CreativePro. Read more. More documents Similar magazines Info. Share from cover. This lesson steps you through the process of acquiring, resizing, and retouching a vintage photograph. For many images, you may need only to change the resolution, lighten the image, or repair a minor blemish. For others, you may need to perform several tasks and employ more advanced filters.

Note In this lesson, you retouch an image using only Photoshop. For other images, it may be more efficient to work in Adobe Camera Raw, which is installed with Photoshop. Likewise, sharpening should usually be your final step. For the other tasks, consider your project and plan accordingly, so that the results of one process do not cause unintended changes to other aspects of the image, making it necessary for you to redo some of your work.

Whether an image is intended for black-and-white publication on newsprint or for full-color online distribution affects everything from the resolution of the initial scan to the type of tonal range and color correction that the image requires. Photoshop supports the CMYK color mode for preparing an image to be printed using process colors, as well as RGB and other color modes for web and mobile authoring. Resolution and image size The first step in retouching a photograph in Photoshop is to make sure that the image has an appropriate resolution.

The term resolution refers to the number of small squares, known as pixels, that describe an image and establish its detail. Resolution is determined by pixel dimensions, or the number of pixels along the width and height of an image. Pixels in a photographic image Note To determine the necessary image resolution for a photograph you plan to print, follow the computer-graphics rule of thumb for color or grayscale images intended for print on large commercial printers: Scan at a resolution 1.

In computer graphics, there are different types of resolution: The number of pixels per unit of length in an image is called the image resolution, usually measured in pixels per inch ppi.

An image with a high resolution has more pixels and therefore a larger file size than an image of the same dimensions with a low resolution. Images in Photoshop can vary from high resolution ppi or higher to low resolution 72 ppi or 96 ppi. Unless the resolution of your image is exactly the same as the resolution of the monitor, the image size in inches, for example onscreen may be larger or smaller than the image size will be when printed.

The number of pixels per unit of length on a monitor is the monitor resolution, also usually measured in pixels per inch ppi. Image pixels are translated directly into monitor pixels. In Photoshop, if the image resolution is higher than the monitor resolution, the image appears larger onscreen than its specified print dimensions. The number of ink dots per inch dpi produced by a platesetter or laser printer is the printer, or output, resolution.

Higher resolution images output to higher resolution printers generally produce the best quality. The appropriate resolution for a printed image is determined both by the printer resolution and by the screen frequency, or lines per inch lpi , of the halftone screens used to reproduce images. Keep in mind that the higher the image resolution, the larger the file size, and the longer the file will take to print or to download from the web.

For more information on resolution and image size, see Photoshop Help. You may make copies of these files and save them under different names or locations, or you may work from the original start files and then download them from the peachpit. In Lesson 1, you used the Open command to open a file. For more information, see page 3. Adobe Bridge opens, displaying a collection of panels, menus, and buttons. Select the Folders tab in the upper left corner, and then browse to the Lessons folder you downloaded onto your hard disk, so that the lesssons in the Lessons folder appear in the Content panel.

Adding files, folders, application icons, and other assets that you use often to the Favorites panel lets you access them quickly. Select the Favorites tab to open the panel, and click the Lessons folder to open it. Then, in the Content panel, double-click the Lesson02 folder.

Thumbnail previews of the folder contents appear in the Content panel. Compare the 02Start. To enlarge the thumbnails in the Content panel, drag the thumbnail slider at the bottom of the Bridge window to the right. In the 02Start. Double-click the 02Start. Choose Photoshop from the Format menu, and name the file 02Working.

You can use either the Crop tool or the Crop command to crop an image. By default, cropping deletes the cropped pixels. In the Tools panel, select the Crop tool. Tip Deselect the Delete Cropped Pixels option if you want to crop nondestructively, so that you can revise the crop later.

Crop handles appear, and a cropping shield covers the area outside the cropping selection. Ratio is the default value. A crop grid appears. Click Straighten in the options bar. The pointer changes to the Straighten tool.

Click at the top corner of the photo, press the mouse button as you drag a straight line across the top edge of the photo, and then release. Photoshop straightens the image, so that the line you drew is parallel with the top of the image area. You drew a line across the top of the photo, but any line that defines either the vertical or horizontal axis of the image will work. Drag the corners of the crop grid inward to the corners of the photo itself to crop out the white border.

If you need to adjust the position of the photo, click and drag it within the crop grid. Press Enter or Return to accept the crop. The image is now cropped, and the cropped image fills the image window, straightened, sized, and positioned according to your specifications.

To see the image dimensions, choose Document Dimensions from the pop-up menu at the bottom of the application window. Click Curves in the Adjustments panel to add a Curves adjustment layer. Select the White Point tool on the left side of the Properties panel.

Specifying a white point changes all the colors in the image. The white point is the color that Photoshop defines as pure white, and it adjusts all other colors accordingly. To set an accurate white point, select a white area in the image. The color tone of the image changes dramatically. In some images, adjusting the white point is enough to remove a color cast and correct the tone of the image.

Here, selecting a white point is a good start. Click Levels in the Adjustments panel to add a Levels adjustment layer. The Levels histogram in the Properties panel displays the range of dark and light values in the image. Right now, you just need to know that the left triangle represents the black point the point Photoshop defines as the darkest in the image , the right triangle represents the white point the lightest in the image , and the middle triangle represents the midtones.

Drag the left triangle blacks under the histogram to the right, where the blacks are more pronounced. Our value was Drag the middle triangle a little to the right to adjust the midtones. Our value was. Flattening an image merges its layers. After you flatten an image, you can no longer edit layers individually, but the file is smaller, and you can easily make changes to the entire image at once. The adjustment layers merge with the Background layer.

He teaches workshops internationally as well as online on the care and identification of photographs. Find out more at gawainweaver. The tools in Photoshop make restoration of old or damaged photographs seem like magic, giving virtually anyone the power to scan, retouch, print, and frame their photo collections.

However, when dealing with works by famous artists, museums, galleries, and collectors need to preserve original objects to the greatest degree possible despite deterioration or accidental damage. Professional art conservators are called upon to clean dust and soiling from print surfaces, remove discoloration and staining, repair tears, stabilize prints to prevent future damage, and even paint in missing areas of a work.

Carleton E. This print was removed from its mount to remove the stains and then remounted. In Photoshop, you can use a Curves adjustment layer to remove the color cast from an image. Likewise, you can use the Spot Healing Brush in Photoshop to spot out specks of dust or dirt on a scanned image.

In Photoshop, you can remove a crease or repair a tear in a scanned image with a few clicks of the Clone tool. After digitization the original print can be safely stored away, while the digital version can be copied or printed for many family members.

Often, we first clean or unfold family photographs to safely reveal as much of the original image as possible, and then we repair the remaining discoloration, stains, and tears on the computer after digitization. Note The Healing Brush tool works similarly to the Spot Healing Brush tool, except that it requires you to sample source pixels before retouching an area. The Spot Healing Brush tool quickly removes blemishes and other imperfections. It samples pixels around the retouched area and matches the texture, lighting, transparency, and shading of the sampled pixels to the pixels being healed.

Zoom in to see the crease clearly. In the Tools panel, select the Spot Healing Brush tool. Make sure Content-Aware is selected in the options bar. In the image window, drag the Spot Healing Brush down from the top of the crease.

You can probably repair the entire crease with four to six neat downward strokes. Zoom in to see the white hair in the upper right area of the image. Then select the Spot Healing Brush again, and paint over the hair. Zoom out, if necessary, to see the full sky. Then click the Spot Healing Brush wherever there are dark areas you want to heal.

Save your work so far. Applying a content-aware patch Use the Patch tool to remove unwanted elements from an image. In Content- Aware mode, the Patch tool creates nearly seamless blending with the nearby content. Type 4 into the Structure slider.

The Structure menu determines how closely the patch reflects the existing image patterns. You can choose from 1 to 7, with 1 allowing the loosest adherence to the source structure and 7 requiring the strictest. Drag the Patch tool around the boy and his shadow, as closely as possible. You may want to zoom in to see him more clearly. Photoshop displays a preview of the content that will replace the boy. Release the mouse button when the patch is positioned where you want it.

The selection changes to match the area around it. The boy is gone, and where he stood is a section of the bridge wall and of a building. The effect was pretty impressive, but not quite perfect. Repairing areas with the Clone Stamp tool The Clone Stamp tool uses pixels from one area of an image to replace the pixels in another part of the image. Using this tool, you can not only remove unwanted objects from your images, but you can also fill in missing areas in photographs you scan from damaged originals.

Make sure that the Aligned option is selected. Move the Clone Stamp tool to an area where the top of the bridge wall is smooth. When you press Alt or Option, the pointer appears as target cross-hairs. Drag the Clone Stamp tool across the top of the bridge wall in the patched area to even it out, and then release the mouse button.

Each time you click the Clone Stamp tool, it begins again with a new source point, in the same relationship to the tool as the first stroke you made. That is, if you begin painting further right, it samples from stone that is further right than the original source point. Deselect Aligned if you want to start from the same source point each time. Select a source point where the bottom of the bridge wall is even, and then drag the Clone Stamp tool across the bottom of the wall where you patched it.

Select a smaller brush size, and deselect Aligned. Then select a source point over the rightmost windows in the lowest row on the building you patched. Click across to create accurate windows there. Repeat step 6 to make any adjustments you want to apply to the lowest area of the building and the wall that runs in front of it. If you like, you can use a smaller brush size to touch up the stones in the patched portion of the wall.

Save your work. Sharpening the image The last task you might want to do when retouching a photo is to sharpen the image. There are several ways to sharpen an image in Photoshop, but the Smart Sharpen filter gives you the most control. The colored dots you see are artifacts of the scanning process. The Threshold value determines how dissimilar the pixels should be before they are eliminated. The Radius value determines the size of the area searched for dissimilar pixels.

The default values are great for tiny dots of color like the ones in this image. Now that the artifacts are gone, you can sharpen the image. In the Smart Sharpen dialog box, make sure that Preview is selected, so you can see the effect of settings you adjust in the image window.

You can drag inside the preview window in the dialog box to see different parts of the image, or use the plus and minus buttons below the thumbnail to zoom in and out. Make sure Lens Blur is chosen in the Remove menu.

Lens Blur provides finer sharpening of detail and reduced sharpening halos. Gaussian Blur increases contrast along the edges in an image. Motion Blur reduces the effects of blur that resulted from the camera or the subject moving when the photo was taken. Drag the Radius slider to about 1. The Radius value determines the number of pixels surrounding the edge pixels that affect the sharpening.

The higher the resolution, the higher the Radius setting should usually be. Your image is ready to share or print! Extra credit Converting a color image to black and white You can get great results converting a color image to black and white with or without a tint in Photoshop. Click Open. Adjust the color sliders to change the saturation of color channels.

You can also experiment with options from the preset menu, such as Darker or Infrared. Or, select the tool in the upper left corner of the Adjustments panel, position it over an area you want to adjust, and drag horizontally to lighten or darken that color wherever it appears in the image.

We darkened the bike itself and made the background areas lighter. If you want to colorize the entire photo with a single hue, select Tint. What does resolution mean? What does the Crop tool do? How can you adjust the tone and color of an image in Photoshop? What tools can you use to remove blemishes in an image? How can you remove digital artifacts such as colored pixels from an image? The term resolution refers to the number of pixels that describe an image and establish its detail.

Image resolution and monitor resolution are measured in pixels per inch ppi. Printer, or output, resolution is measured in ink dots per inch dpi. You can use the Crop tool to trim, scale, or straighten an image. To adjust the tone and color of an image in Photoshop, first use the White Point tool in a Curves adjustment layer. Then refine the tone using a Levels adjustment layer. The Clone Stamp tool copies the source area exactly; the Healing Brush and Spot Healing Brush tools blend the area with the surrounding pixels.

In Content-Aware mode, the Patch tool replaces a selection with content that matches the surrounding area. About selecting and selection tools Making changes to an area within an image in Photoshop is a two-step process.

You first use one of the selection tools to select the part of an image you want to change. Then you use another tool, filter, or other feature to make changes, such as moving the selected pixels to another location or applying a filter to the selected area. You can make selections based on size, shape, and color. When a selection is active, changes you make apply only to the selected area; other areas are unaffected.

There are four primary types of selections: Geometric selections The Rectangular Marquee tool selects a rectangular area in an image. The Elliptical Marquee tool , which is hidden behind the Rectangular Marquee tool, selects elliptical areas. The Single Row Marquee tool and Single Column Marquee tool select either a 1-pixel-high row or a 1-pixel-wide column, respectively. Freehand selections The Lasso tool traces a freehand selection around an area.

The Polygonal Lasso tool sets anchor points in straight-line segments around an area. The Magnetic Lasso tool works something like a combination of the other two lasso tools, and gives the best results when good contrast exists between the area you want to select and its surroundings. Color-based selections The Magic Wand tool selects parts of an image based on the similarity in pixel color. It is useful for selecting odd-shaped areas that share a specific range of colors.

In the Favorites panel, click the Lessons folder. Then double-click the Lesson03 folder in the Content panel to see its contents. Study the 03End. Move the thumbnail slider to the right if you want to see the image in more detail. The project is a shadowbox that includes a piece of coral, a sand dollar, a mussel, a nautilus, and a plate of small shells. The challenge in this lesson is to arrange these elements, which were scanned together on the single page you see in the 03Start.

Double-click the 03Start. Using the Quick Selection tool The Quick Selection tool provides one of the easiest ways to make a selection. You simply paint an area of an image, and the tool automatically finds the edges. You can add or subtract areas of the selection until you have exactly the area you want. The image of the sand dollar in the 03Working. Select the Zoom tool in the Tools panel, and then zoom in so that you can see the sand dollar well.

Select the Quick Selection tool in the Tools panel. Select Auto-Enhance in the options bar. When Auto-Enhance is selected, the Quick Selection tool creates better quality selections, with edges that are truer to the object. The selection process is a little slower than using the Quick Selection tool without Auto-Enhance, but the results are superior. Click on an off-white area near the outside edge of the sand dollar.

The Quick Selection tool finds the full edge automatically, selecting the entire sand dollar. Leave the selection active so that you can use it in the next exercise. The rest of the image is not affected by those changes. To move the selected area to another part of the composition, you use the Move tool.

This image has only one layer, so the pixels you move will replace the pixels beneath them. If the sand dollar is not still selected, repeat the previous exercise to select it. Zoom out so you can see both the shadowbox and the sand dollar.

Select the Move tool. Notice that the sand dollar remains selected. Unless a selection tool is active, clicking elsewhere in the image will not deselect the active area. The layers that are under the pointer appear in the context menu. Manipulating selections You can move selections, reposition them as you create them, and even duplicate them. One of the most useful things you may find in this section is the introduction of keyboard shortcuts that can save you time and arm motions.

Repositioning a selection marquee while creating it Selecting ovals and circles can be tricky. As you perform this exercise, be very careful to follow the directions about keeping the mouse button or specific keys pressed. If you accidentally release the mouse button at the wrong time, simply start the exercise again from step 1.

Select the Elliptical Marquee tool , hidden under the Rectangular Marquee tool. Move the pointer over the plate of shells, and drag diagonally across the oval plate to create a selection, but do not release the mouse button. If you accidentally release the mouse button, draw the selection again. In most cases— including this one—the new selection replaces the previous one. Still holding down the mouse button, press the spacebar, and continue to drag the selection. Position it so that it more closely aligns with the plate.

Carefully release the spacebar but not the mouse button and continue to drag, trying to make the size and shape of the selection match the oval plate of shells as closely as possible.

If necessary, hold down the spacebar again and drag to move the selection marquee into position around the plate of shells. When the selection border is positioned appropriately, release the mouse button. Leave the Elliptical Marquee tool and the selection active for the next exercise. If the plate of shells is not still selected, repeat the previous exercise to select it. The pointer icon now includes a pair of scissors to indicate that the selection will be cut from its current location.

Note You can release the Ctrl or Command key after you start dragging, and the Move tool remains active. Photoshop reverts to the previously selected tool when you deselect, whether you click outside the selection or use the Deselect command. Moving a selection with the arrow keys You can make minor adjustments to the position of selected pixels by using the arrow keys.

You can nudge the selection in increments of either one pixel or ten pixels. When a selection tool is active in the Tools panel, the arrow keys nudge the selection border, but not the contents.

When the Move tool is active, the arrow keys move both the selection border and its contents. Before you begin, make sure that the plate of shells is still selected in the image window.

Press the Up Arrow key on your keyboard a few times to move the oval upward. Notice that each time you press the arrow key, the plate of shells moves one pixel. Experiment by pressing the other arrow keys to see how they affect the selection. Hold down the Shift key as you press an arrow key. When you hold down the Shift key, the selection moves ten pixels every time you press an arrow key. Sometimes the border around a selected area can distract you as you make adjustments.

Either command hides the selection border around the plate of shells. Using the Magic Wand tool The Magic Wand tool selects all the pixels of a particular color or color range. As with many of the selection tools, after you make the initial selection, you can add or subtract areas of the selection.

The Tolerance option sets the sensitivity of the Magic Wand tool. This value limits or extends the range of pixel similarity. The default tolerance value of 32 selects the color you click plus 32 lighter and 32 darker tones of that color. You may need to adjust the tolerance level up or down depending on the color ranges and variations in the image.

If a multicolored area that you want to select is set against a background of a different color, it can be much easier to select the background than the area itself. Select the Rectangular Marquee tool , hidden behind the Elliptical Marquee tool. Drag a selection around the piece of coral.

Make sure that your selection is large enough so that a margin of white appears between the coral and the edges of the marquee. At this point, the coral and the white background area are selected. Select the Magic Wand tool , hidden under the Quick Selection tool. In the options bar, confirm that the Tolerance value is This value determines the range of colors the wand selects. Click the Subtract From Selection button in the options bar. A minus sign appears next to the wand in the pointer icon.

Anything you select now will be subtracted from the initial selection. Click in the white background area within the selection marquee. The Magic Wand tool selects the entire background, subtracting it from the selection. Now all the white pixels are deselected, leaving the coral perfectly selected. Softening the edges of a selection To smooth the hard edges of a selection, you can apply anti-aliasing or feathering, or use the Refine Edge option. Anti-aliasing smooths the jagged edges of a selection by softening the color transition between edge pixels and background pixels.

Since only the edge pixels change, no detail is lost. Anti-aliasing is useful when cutting, copying, and pasting selections to create composite images. Select the tool to display its options in the options bar. To apply anti-aliasing, you must select the option before making the selection. Once a selection is made, you cannot add anti- aliasing to it.

Feathering blurs edges by building a transition boundary between the selection and its surrounding pixels. This blurring can cause some loss of detail at the edge of the selection. You can define feathering for the marquee and lasso tools as you use them, or you can add feathering to an existing selection. Feathering effects become apparent when you move, cut, or copy the selection.

You can use the Refine Edge option to smooth the outline, feather it, or contract or expand it. Enter a Feather value in the options bar. This value defines the width of the feathered edge and can range from 1 to pixels. Enter a value for the Feather Radius, and click OK. Selecting with the lasso tools As we mentioned earlier, Photoshop includes three lasso tools: the Lasso tool, the Polygonal Lasso tool, and the Magnetic Lasso tool.

You can use the Lasso tool to make selections that require both freehand and straight lines, using keyboard shortcuts to move back and forth between the Lasso tool and the Polygonal Lasso tool. Make sure you can see the entire mussel in the window. Do not release the mouse button. Press the Alt Windows or Option Mac OS key, and then release the mouse button so that the lasso pointer changes to the polygonal lasso shape.

Do not release the Alt or Option key. Begin clicking along the end of the mussel to place anchor points, following the contours of the mussel. Be sure to hold down the Alt or Option key throughout this process. The selection border automatically stretches like a rubber band between anchor points. When you reach the tip of the mussel, hold down the mouse button as you release the Alt or Option key. The pointer again appears as the lasso icon. Carefully drag around the tip of the mussel, holding down the mouse button.

When you finish tracing the tip and reach the lower side of the mussel, first press Alt or Option again, and then release the mouse button. Click along the lower side of the mussel with the Polygonal Lasso tool as you did on the top. Continue to trace the mussel until you arrive back at the starting point of your selection near the left end of the image.

Click the starting point of the selection, and then release Alt or Option. The mussel is now entirely selected. Leave the mussel selected for the next exercise. Note To make sure that the selection is the shape you want when you use the Lasso tool, end the selection by dragging across the starting point of the selection. If you start and stop the selection at different points, Photoshop draws a straight line between the start and end points of the selection.

Before you begin, make sure that the mussel is still selected. The mussel and selection marquee are enclosed in a bounding box. Move the pointer outside the bounding box so that it becomes a curved, double- headed arrow. Drag to rotate the mussel to a degree angle. You can verify the angle in the Rotate box in the options bar. Press Enter or Return to commit the transformation. If necessary, select the Move tool and drag to reposition the mussel, leaving a shadow to match the others.

Selecting with the Magnetic Lasso tool You can use the Magnetic Lasso tool to make freehand selections of areas with high- contrast edges. When you draw with the Magnetic Lasso tool, the selection border automatically snaps to the edge between areas of contrast. You can also control the selection path by occasionally clicking the mouse to place anchor points in the selection border.

Select the Magnetic Lasso tool , hidden under the Lasso tool. Click once along the left edge of the nautilus, and then move the Magnetic Lasso tool along the edge to trace its outline. Tip In low-contrast areas, you may want to click to place your own fastening points. You can add as many as you need. To remove the most recent fastening point, press Delete, and then move the mouse back to the remaining fastening point and continue selecting.

When you reach the left side of the nautilus again, double-click to return the Magnetic Lasso tool to the starting point, closing the selection. Or you can move the Magnetic Lasso tool over the starting point and click once. Double-click the Hand tool to fit the image in the image window. Make sure that you can see the entire screw head in your image window. Select the Elliptical Marquee tool in the Tools panel. Move the pointer to the approximate center of the screw. Click and begin dragging.

Then, without releasing the mouse button, press Alt Windows or Option Mac OS as you continue dragging the selection to the outer edge of the screw.

The selection is centered over its starting point. When you have the entire screw head selected, release the mouse button first, and then release Alt or Option and the Shift key if you used it. Tip To select a perfect circle, press Shift as you drag. Hold down Shift while dragging the Rectangular Marquee tool to select a perfect square. If necessary, reposition the selection border using one of the methods you learned earlier.

Before you begin, make sure that the screw is still selected. Select the Move tool in the Tools panel. Position the pointer within the screw selection. The pointer becomes an arrow with a pair of scissors , indicating that dragging the selection will cut it from its current location and move it to the new location. Drag the screw onto the lower right corner of the shadowbox.

A bounding box appears around the selection. Then press Enter or Return to commit the change and remove the transformation bounding box. As you resize the object, the selection marquee resizes, too. Use the Move tool to reposition the screw after resizing it, so that it is centered in the corner of the shadowbox frame.

Moving and duplicating a selection simultaneously You can move and duplicate a selection at the same time. If the screw is no longer selected, reselect it now, using the techniques you learned earlier.

The pointer changes, displaying the usual black arrow and an additional white arrow, which indicates that a duplicate will be made when you move the selection. Continue holding down the Alt or Option key as you drag a duplicate of the screw straight up to the top right corner of the frame.

Pressing the Shift key as you move a selection constrains the movement horizontally or vertically in degree increments. Repeat step 3 to drag a fourth screw to the lower left corner of the frame. Copying selections You can use the Move tool to copy selections as you drag them within or between images, or you can copy and move selections using the Copy, Copy Merged, Paste, and Paste Into commands. Dragging with the Move tool saves memory, because the clipboard is not used as it is with the commands.

The source selection is pasted onto a new layer, and the destination selection border is converted into a layer mask. Keep in mind that when a selection is pasted between images with different resolutions, the pasted data retains its pixel dimensions. This can make the pasted portion appear out of proportion to the new image. Use the Image Size command to make the source and destination images the same resolution before copying and pasting.

Select the Crop tool , or press C to switch from the current tool to the Crop tool. Photoshop displays a crop boundary around the entire image. In the options bar, make sure Ratio is selected in the Preset pop-up menu and that there are no ratio values specified. Then confirm that Delete Cropped Pixels is selected. When Ratio is selected but no ratio values are specified, you can crop the image with any proportions.

Drag the crop handles so that the shadowbox is in the highlighted area, omitting the backgrounds from the original objects at the bottom of the image. Tip To crop an image with its original proportions intact, choose Original Ratio from the Preset pop-up menu in the options bar. The shadowbox is complete! How do you add to and subtract from a selection? What does the Quick Selection tool do? How does the Magic Wand tool determine which areas of an image to select?

What is tolerance, and how does it affect a selection? Only the area within an active selection can be edited. To add to a selection, click the Add To Selection button in the options bar, and then click the area you want to add. To subtract from a selection, click the Subtract From Selection button in the options bar, and then click the area you want to subtract. You can also add to a selection by pressing Shift as you drag or click; to subtract, press Alt Windows or Option Mac OS as you drag or click.

The Quick Selection tool expands outward from where you click to automatically find and follow defined edges in the image. The Magic Wand tool selects adjacent pixels based on their similarity in color. The Tolerance value determines how many color tones the Magic Wand tool will select. The higher the tolerance setting, the more tones are selected. This lesson will take less than an hour to complete. Each layer can then be edited as discrete artwork, giving you tremendous flexibility as you compose and revise an image.

About layers Every Photoshop file contains one or more layers. New files are generally created with a background layer, which contains a color or an image that shows through the transparent areas of subsequent layers. All new layers in an image are transparent until you add text or artwork pixel values. Working with layers is analogous to placing portions of a drawing on clear sheets of film, such as those viewed with an overhead projector: Individual sheets may be edited, repositioned, and deleted without affecting the other sheets.

When the sheets are stacked, the entire composition is visible. When prompted, click Yes to delete the Adobe Photoshop Settings file. Then double-click the Lesson04 folder in the Content panel to see its contents.

Study the 04End. This layered composite represents a postcard. You will create it in this lesson as you learn how to create, edit, and manage layers. Double-click the 04Start. Saving another version of the start file frees you to make changes without worrying about overwriting the original. Using the Layers panel The Layers panel lists all the layers in an image, displaying the layer names and thumbnails of the content on each layer.

You can use the Layers panel to hide, view, reposition, delete, rename, and merge layers. The layer thumbnails are automatically updated as you edit the layers. The Layers panel lists five layers for the 04Working. If you click the eye, the image window no longer displays that layer. The first task for this project is to add a photo of the beach to the postcard. Tip Use the context menu to hide or resize the layer thumbnail. Right-click Windows or Control-click Mac OS a thumbnail in the Layers panel to open the context menu, and then choose a thumbnail size.

The Layers panel changes to display the layer information for the active Beach. Notice that only one layer appears in the Beach. An image can have only one background layer. You cannot change the stacking order of a background layer, its blending mode, or its opacity.

You can, however, convert a background layer to a regular layer. To convert a background layer into a regular layer: 1. Click the lock icon next to the layer name. Rename the layer. To convert a regular layer into a background layer: 1. Select a layer in the Layers panel. Renaming and copying a layer To add content to an image and simultaneously create a new layer for it, drag an object or layer from one file into the image window of another file.

Whether you drag from the image window of the original file or from its Layers panel, only the active layer is reproduced in the destination file. Before you begin, make sure that both the 04Working. Keep the layer selected. Photoshop displays both of the open image files. Select the Beach. Select the Move tool , and use it to drag the Beach. Tip If you hold down Shift as you drag an image from one file into another, the dragged image automatically centers itself in the target image window.

The Beach layer now appears in the 04Working. Photoshop always adds new layers directly above the selected layer; you selected the Background layer earlier. Close the Beach. Tip Need images for a project like this one? If you purchase the images, Photoshop replaces the placeholders with high-resolution images.

Viewing individual layers The 04Working. Some of the layers are visible and some are hidden. The eye icon next to a layer thumbnail in the Layers panel indicates that the layer is visible. Click the eye icon next to the Pineapple layer to hide the image of the pineapple. Select the Beach layer.

To select the layer, click the layer name in the Layers panel. The layer is highlighted, indicating that it is active. Changes you make in the image window affect the active layer. To make the opaque areas on this layer more obvious, hide all layers except the Beach layer: Press Alt Windows or Option Mac OS as you click the eye icon next to the Beach layer.

The white background and other objects in the image disappear, leaving only the beach image against a checkerboard background. The checkerboard indicates transparent areas of the active layer. The Layer Style dialog box opens. Click OK. A white border appears around the beach photo. Rearranging layers The order in which the layers of an image are organized is called the stacking order. The stacking order determines how the image is viewed—you can change the order to make certain parts of the image appear in front of or behind other layers.

The beach image is almost entirely blocked by images on other layers. Changing the opacity of a layer You can reduce the opacity of any layer to reveal the layers below it. In this case, the postmark is too dark on the flower. Select the Postage layer, and then click the arrow next to the Opacity field to display the Opacity slider.

You can also type 25 in the Opacity box or scrub the Opacity label. Notice that the change in opacity affects only the image area of the Postage layer. Duplicating a layer and changing the blending mode You can apply different blending modes to a layer.

Blending modes affect how the color pixels on one layer blend with pixels on the layers underneath. Currently, the blending mode for both layers is Normal. Right-click or Control-click the Pineapple layer, and choose Duplicate Layer from the context menu.

Click OK in the Duplicate Layer dialog box. Blending modes Blending modes affect how the color pixels on one layer blend with pixels on the layers beneath them. The default blending mode, Normal, hides pixels beneath the top layer unless the top layer is partially or completely transparent.

Each of the other blending modes let you control the way the pixels in the layers interact with each other. Often, the best way to see how a blending mode affects your image is simply to try it. You can easily experiment with different blending modes in the Layers panel, applying one after another to compare the effects. As you begin experimenting, keep in mind how different groups of blending modes affect an image.

Patterns or colors overlay the existing pixels while preserving the highlights and shadows of the underlying layers. With the Pineapple copy layer selected, choose Overlay from the Blending Modes menu in the Layers panel. The Overlay blending mode blends the Pineapple copy layer with the Pineapple layer beneath it to create a vibrant, more colorful pineapple with deeper shadows and brighter highlights. Select the Postage layer, and choose Multiply from the Blending Modes menu.

The Multiply blending mode multiplies the colors in the underlying layers with the color in the top layer. In this case, the postmark becomes a little stronger. Resizing and rotating layers You can resize and transform layers. Click the Visibility column on the Beach layer to make the layer visible.

A Transform bounding box appears around the beach image. The bounding box has handles on each corner and each side.

Watch the Width and Height percentages in the options bar. With the bounding box still active, position the pointer just outside one of the corner handles until it becomes a curved double arrow. Drag clockwise to rotate the beach image approximately 15 degrees. You can also enter 15 in the Set Rotation box in the options bar. Click the Commit Transform button in the options bar. Make the Flower layer visible. Then, select the Move tool , and drag the beach photo so that its corner is tucked neatly beneath the flower, as in the illustration.

Adding empty layers to a file is comparable to adding blank sheets of film to a stack of images. In the Layers panel, select the Background layer to make it active, and then click the Create A New Layer button at the bottom of the Layers panel.

A new layer, named Layer 1, appears between the Background and Pineapple layers. The layer has no content, so it has no effect on the image. Double-click the name Layer 1, type Clouds, and press Enter or Return to rename the layer.

In the Tools panel, click the foreground color swatch, select a sky blue color from the Color Picker, and click OK. The Background Color remains white. Realistic-looking clouds appear behind the image. Dragging to add a new layer You can add a layer to an image by dragging an image file from the desktop, Bridge, or Explorer Windows or the Finder Mac OS. In Photoshop, select the Pineapple copy layer in the Layers panel to make it the active layer.

Then navigate to the Lesson04 folder. Select Flower2. The Flower2 layer appears in the Layers panel, directly above the Pineapple copy layer. Photoshop places the image as a Smart Object, which is a layer you can edit without making permanent changes. Tip You can drag images from a Bridge window to Photoshop as easily as you can drag from the Windows or Mac desktop. Position the Flower2 layer in the lower left corner of the postcard, so that about half of the top flower is visible.

Click the Commit Transform button in the options bar to accept the layer. Then click the Commit Any Current Edits button in the options bar. This layer is at the top of the layer stack. Note If you make a mistake when you click to set the type, simply click away from the type and repeat step 4. In the Tools panel, select the Gradient tool. The text has been rasterized.

The Background Color should still be white. In the options bar, make sure that Linear Gradient is selected. Tip To list the gradient options by name rather than by sample, click the menu button in the gradient picker, and choose either Small List or Large List. Or, hover the pointer over a thumbnail until a tool tip appears, showing the gradient name. In the options bar, click the arrow next to the Gradient Editor box to open the Gradient Picker.

With the selection still active, drag the Gradient tool from the bottom to the top of the letters. If you want to be sure you drag straight up, press the Shift key as you drag. The gradient extends across the type, starting with orange at the bottom and gradually blending to white at the top. Applying a layer style You can enhance a layer by adding a shadow, stroke, satin sheen, or other special effect from a collection of automated and editable layer styles.

These styles are easy to apply, and they link directly to the layer you specify. Like layers, layer styles can be hidden by clicking eye icons in the Layers panel. Layer styles are nondestructive, so you can edit or remove them at any time. You can apply a copy of a layer style to a different layer by dragging the effect onto the destination layer. Earlier, you used a layer style to add a stroke to the beach photo. In the Layer Style dialog box, make sure that the Preview option is selected, and then, if necessary, move the dialog box so that you can see the Island Paradise text in the image window.

Tip You can also open the Layer Style dialog box by clicking the Add A Layer Style button at the bottom of the Layers panel and then choosing a layer style, such as Bevel And Emboss, from the pop-up menu. If you set a lighting angle in one of these effects, every other effect with Use Global Light selected inherits the same angle setting. Angle determines the lighting angle at which the effect is applied to the layer. Distance determines the offset distance for a shadow or satin effect.

Size determines how far the shadow extends. Click OK to accept the settings and close the Layer Style dialog box. Photoshop nests the layer style in the Island Paradise layer. First it lists Effects, and then the layer styles applied to the layer.

 
 

 

DOWNLOAD Adobe Photoshop CC Classroom in a Book ( release) PDF eBook

 
Adobe Photoshop CC release Alberto Seveso. CLASSROOM IN A BOOK速 The official training workbook from Adobe Andrew Faulkner &. Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software. START NOW. Step-By Step To Download this book.

 
 

Adobe Photoshop CC Classroom in a Book ( release) | Adobe Press

 
 

In the Layers panel, click the Visibility column for the Ribbons layer to make the layer visible. When a layer is visible, an eye icon appears in that column. Select the Eyedropper tool in the Tools panel.

Click the blue area in the Happy Birthday ribbon to sample a blue color. The foreground color changes in the Tools panel and the Color panel.

Anything you draw will be this color until you change the foreground color again. Working with tools and tool properties When you selected the Zoom tool in the previous exercise, you saw that the options bar provided ways for you to change the view of the current image window. Using context menus Context menus are short menus that contain commands and options appropriate to specific elements in the work area.

Usually, the commands on a context menu are also available in some other area of the user interface, but using the context menu can save time. Select the Zoom tool , and zoom in so you can clearly see the lower third of the card. Select the Rectangular Marquee tool in the Tools panel. The Rectangular Marquee tool selects rectangular areas. See the illustration below. As you drag the tool, Photoshop displays the width and height of the selected area.

Selection areas are shown by moving dotted lines, sometimes referred to as marching ants. Select the Brush tool in the Tools panel. In the image window, right-click Windows or Control-click Mac OS anywhere in the image to open the Brush tool context menu.

Context menus vary with their context, of course, so what appears can be a menu of commands or a panel-like set of options, which is what happens in this case. Select the first brush Soft Round , and change the size to 65 pixels. Click anywhere outside the selection to close the panel. Note Clicking anywhere in the work area closes the context menu.

The selection is gone, but the blue bar remains. Selecting and using a hidden tool Photoshop has many tools you can use to edit image files, but you will probably work with only a few of them at a time.

The Tools panel arranges some of the tools in groups, with only one tool shown for each group. The other tools in the group are hidden behind that tool. A small triangle in the lower right corner of a button is your clue that other tools are available but hidden under that tool. Position the pointer over the third tool from the top in the Tools panel until the tool tip appears.

The tool tip identifies the Lasso tool , with the keyboard shortcut L. Select the Lasso tool. With the Lasso tool, you can draw free-form selections; the Polygonal Lasso tool makes it easier to draw straight-edged sections of a selection border. Move the pointer over the left edge of the blue color bar that you just painted.

Click just to the left of the upper left corner of the bar to start your selection. You should begin your selection just outside the colored area.

Click just to the left of the bottom left corner of the bar to create the second side of the triangle. Click the point where you started to finish the triangle. Press the Delete key on your keyboard to delete the selected area from the colored bar, creating a notch for your ribbon. The ribbon is ready. Now you can add a name to your birthday card. In the Tools panel, select the Horizontal Type tool.

The buttons and menus in the options bar now relate to the Type tool. In the options bar, select a font you like from the first pop-up menu. We used Minion Pro Italic, but you can use another font if you prefer. Specify 32 pt for the font size.

You can specify 32 points by typing directly in the font-size text box and pressing Enter or Return, or by scrubbing the font-size menu label. You can also choose a standard font size from the font-size pop-up menu. Click once anywhere on the left side of the colored bar, and type Elaine. Or you can type a different name, if you like.

The text is the same color as the bar you typed it on. Alt-dragging Windows or Option- dragging Mac OS changes the values in smaller increments; Shift-dragging changes them in larger increments. Using panels and panel menus The text color is the same as the Foreground Color swatch in the Tools panel, which is the blue color you used to paint the bar. Make sure the Horizontal Type tool is selected in the Tools panel.

Drag the Horizontal Type tool across the text to select the full name. Select any light-colored swatch. We chose pastel yellow. Note When you move the pointer over the swatches, it temporarily changes into an eyedropper. Set the tip of the eyedropper on the swatch you want, and click to select it. The color you select appears in three places: as the Foreground Color in the Tools panel, in the text color swatch in the options bar, and in the text you selected in the image window.

Select another tool in the Tools panel, such as the Move tool , to deselect the text so that you can see the text color. Click the menu button on the Swatches panel to open the panel menu, and choose Small List.

Select the Type tool and reselect the text, as you did in steps 1 and 2. In the Swatches panel, scroll about halfway down the list to find the Light Yellow Orange swatch, and then select it.

Select the Move tool again to deselect the text. Now the text appears in the orange color. Typing V will add the letter to your text in the image window. You can experiment freely, knowing that you can reverse the process. Even beginning computer users quickly come to appreciate the familiar Undo command. The name returns to its previous color. The Undo command in Photoshop reverses only one step. This is a practicality, because Photoshop files can be very large, and maintaining multiple Undo steps can tie up a lot of memory, which tends to degrade performance.

However, you can often use the Step Backward and Step Forward commands in the Edit menu to move through multiple steps. Save the file. Your birthday card is done! More about panels and panel locations Photoshop panels are powerful and varied.

Rarely would you need to see all panels simultaneously. The complete list of panels appears in the Window menu. Check marks appear next to the names of the panels that are open and active in their panel groups. You can open a closed panel or close an open one by selecting the panel name in the Window menu. You can hide all panels at once—including the options bar and Tools panel—by pressing the Tab key. To reopen them, press Tab again. Note When panels are hidden, a thin, semitransparent strip is visible at the edge of the document.

Hovering the pointer over the strip displays its contents. You already used panels in the panel dock when you used the Layers and Swatches panels.

You can drag panels to or from the panel dock. This is convenient for bulky panels or ones that you use only occasionally but want to keep handy. To expand a panel, click its icon or the double arrow.

You can also pull the lower right corner in or out. Note You can collapse, but not resize, the Character and Paragraph panels. Double-click again to restore it to the expanded view. You can open the panel menu even when the panel is collapsed. Notice that the tabs for the panels in the panel group and the button for the panel menu remain visible after you collapse a panel. You can move the options bar to another location by dragging the grab bar at the far left end of the panel.

Changing interface settings By default, the panels, dialog boxes, and background in Photoshop are dark. You can lighten the interface or make other changes in the Photoshop Preferences dialog box: 1. Select a different color theme, or make other changes. When you select a different theme, you can see the changes immediately. You can also select specific colors for different screen modes and change other interface settings in this dialog box. Review questions 1. Describe two types of images you can open in Photoshop.

How do you select tools in Photoshop? Describe two ways to zoom in to or out from an image. What are two ways to get more information about Photoshop? Review answers 1. You can scan a photograph, transparency, negative, or graphic into the program; capture a digital video image; or import artwork created in a drawing program.

You can also import digital photos. A selected tool remains active until you select a different tool. To select a hidden tool, either use a keyboard shortcut to toggle through the tools, or click and hold the tool in the Tools panel to open a pop-up menu of the hidden tools.

Choose commands from the View menu to zoom in on or out from an image, or to fit it onscreen, or use the zoom tools and click or drag over an image to enlarge or reduce the view. You can also use keyboard shortcuts or the Navigator panel to control the display of an image.

The Photoshop Help system includes full information about Photoshop features plus keyboard shortcuts, task-based topics, and illustrations. Creative Cloud Learn provides inspiration, key techniques, cross-product workflows, and updates on new features. This lesson steps you through the process of acquiring, resizing, and retouching a vintage photograph. For many images, you may need only to change the resolution, lighten the image, or repair a minor blemish. For others, you may need to perform several tasks and employ more advanced filters.

Note In this lesson, you retouch an image using only Photoshop. For other images, it may be more efficient to work in Adobe Camera Raw, which is installed with Photoshop. Likewise, sharpening should usually be your final step. For the other tasks, consider your project and plan accordingly, so that the results of one process do not cause unintended changes to other aspects of the image, making it necessary for you to redo some of your work.

Whether an image is intended for black-and-white publication on newsprint or for full-color online distribution affects everything from the resolution of the initial scan to the type of tonal range and color correction that the image requires. Photoshop supports the CMYK color mode for preparing an image to be printed using process colors, as well as RGB and other color modes for web and mobile authoring.

Resolution and image size The first step in retouching a photograph in Photoshop is to make sure that the image has an appropriate resolution. The term resolution refers to the number of small squares, known as pixels, that describe an image and establish its detail. Resolution is determined by pixel dimensions, or the number of pixels along the width and height of an image. Pixels in a photographic image Note To determine the necessary image resolution for a photograph you plan to print, follow the computer-graphics rule of thumb for color or grayscale images intended for print on large commercial printers: Scan at a resolution 1.

In computer graphics, there are different types of resolution: The number of pixels per unit of length in an image is called the image resolution, usually measured in pixels per inch ppi.

An image with a high resolution has more pixels and therefore a larger file size than an image of the same dimensions with a low resolution. Images in Photoshop can vary from high resolution ppi or higher to low resolution 72 ppi or 96 ppi. Unless the resolution of your image is exactly the same as the resolution of the monitor, the image size in inches, for example onscreen may be larger or smaller than the image size will be when printed.

The number of pixels per unit of length on a monitor is the monitor resolution, also usually measured in pixels per inch ppi. Image pixels are translated directly into monitor pixels. In Photoshop, if the image resolution is higher than the monitor resolution, the image appears larger onscreen than its specified print dimensions. The number of ink dots per inch dpi produced by a platesetter or laser printer is the printer, or output, resolution. Higher resolution images output to higher resolution printers generally produce the best quality.

The appropriate resolution for a printed image is determined both by the printer resolution and by the screen frequency, or lines per inch lpi , of the halftone screens used to reproduce images.

Keep in mind that the higher the image resolution, the larger the file size, and the longer the file will take to print or to download from the web. For more information on resolution and image size, see Photoshop Help. You may make copies of these files and save them under different names or locations, or you may work from the original start files and then download them from the peachpit. In Lesson 1, you used the Open command to open a file.

For more information, see page 3. Adobe Bridge opens, displaying a collection of panels, menus, and buttons. Select the Folders tab in the upper left corner, and then browse to the Lessons folder you downloaded onto your hard disk, so that the lesssons in the Lessons folder appear in the Content panel. Adding files, folders, application icons, and other assets that you use often to the Favorites panel lets you access them quickly.

Select the Favorites tab to open the panel, and click the Lessons folder to open it. Then, in the Content panel, double-click the Lesson02 folder. Thumbnail previews of the folder contents appear in the Content panel. Compare the 02Start. To enlarge the thumbnails in the Content panel, drag the thumbnail slider at the bottom of the Bridge window to the right.

In the 02Start. Double-click the 02Start. Choose Photoshop from the Format menu, and name the file 02Working. You can use either the Crop tool or the Crop command to crop an image. By default, cropping deletes the cropped pixels. In the Tools panel, select the Crop tool. Tip Deselect the Delete Cropped Pixels option if you want to crop nondestructively, so that you can revise the crop later. Crop handles appear, and a cropping shield covers the area outside the cropping selection. Ratio is the default value.

A crop grid appears. Click Straighten in the options bar. The pointer changes to the Straighten tool. Click at the top corner of the photo, press the mouse button as you drag a straight line across the top edge of the photo, and then release. Photoshop straightens the image, so that the line you drew is parallel with the top of the image area. You drew a line across the top of the photo, but any line that defines either the vertical or horizontal axis of the image will work.

Drag the corners of the crop grid inward to the corners of the photo itself to crop out the white border. If you need to adjust the position of the photo, click and drag it within the crop grid. Press Enter or Return to accept the crop. The image is now cropped, and the cropped image fills the image window, straightened, sized, and positioned according to your specifications.

To see the image dimensions, choose Document Dimensions from the pop-up menu at the bottom of the application window. Click Curves in the Adjustments panel to add a Curves adjustment layer.

Select the White Point tool on the left side of the Properties panel. Specifying a white point changes all the colors in the image. The white point is the color that Photoshop defines as pure white, and it adjusts all other colors accordingly. To set an accurate white point, select a white area in the image. The color tone of the image changes dramatically. In some images, adjusting the white point is enough to remove a color cast and correct the tone of the image. Here, selecting a white point is a good start.

Click Levels in the Adjustments panel to add a Levels adjustment layer. The Levels histogram in the Properties panel displays the range of dark and light values in the image. Right now, you just need to know that the left triangle represents the black point the point Photoshop defines as the darkest in the image , the right triangle represents the white point the lightest in the image , and the middle triangle represents the midtones. Drag the left triangle blacks under the histogram to the right, where the blacks are more pronounced.

Our value was Drag the middle triangle a little to the right to adjust the midtones. Our value was. Flattening an image merges its layers. After you flatten an image, you can no longer edit layers individually, but the file is smaller, and you can easily make changes to the entire image at once.

The adjustment layers merge with the Background layer. He teaches workshops internationally as well as online on the care and identification of photographs. Find out more at gawainweaver. The tools in Photoshop make restoration of old or damaged photographs seem like magic, giving virtually anyone the power to scan, retouch, print, and frame their photo collections. However, when dealing with works by famous artists, museums, galleries, and collectors need to preserve original objects to the greatest degree possible despite deterioration or accidental damage.

Professional art conservators are called upon to clean dust and soiling from print surfaces, remove discoloration and staining, repair tears, stabilize prints to prevent future damage, and even paint in missing areas of a work. Carleton E. This print was removed from its mount to remove the stains and then remounted. In Photoshop, you can use a Curves adjustment layer to remove the color cast from an image. Likewise, you can use the Spot Healing Brush in Photoshop to spot out specks of dust or dirt on a scanned image.

In Photoshop, you can remove a crease or repair a tear in a scanned image with a few clicks of the Clone tool. After digitization the original print can be safely stored away, while the digital version can be copied or printed for many family members. Often, we first clean or unfold family photographs to safely reveal as much of the original image as possible, and then we repair the remaining discoloration, stains, and tears on the computer after digitization.

Note The Healing Brush tool works similarly to the Spot Healing Brush tool, except that it requires you to sample source pixels before retouching an area. The Spot Healing Brush tool quickly removes blemishes and other imperfections. It samples pixels around the retouched area and matches the texture, lighting, transparency, and shading of the sampled pixels to the pixels being healed. Zoom in to see the crease clearly. In the Tools panel, select the Spot Healing Brush tool. Make sure Content-Aware is selected in the options bar.

In the image window, drag the Spot Healing Brush down from the top of the crease. You can probably repair the entire crease with four to six neat downward strokes. Zoom in to see the white hair in the upper right area of the image. Then select the Spot Healing Brush again, and paint over the hair.

Zoom out, if necessary, to see the full sky. Then click the Spot Healing Brush wherever there are dark areas you want to heal. Save your work so far. Applying a content-aware patch Use the Patch tool to remove unwanted elements from an image. In Content- Aware mode, the Patch tool creates nearly seamless blending with the nearby content. Type 4 into the Structure slider.

The Structure menu determines how closely the patch reflects the existing image patterns. You can choose from 1 to 7, with 1 allowing the loosest adherence to the source structure and 7 requiring the strictest. Drag the Patch tool around the boy and his shadow, as closely as possible. You may want to zoom in to see him more clearly. Photoshop displays a preview of the content that will replace the boy. Release the mouse button when the patch is positioned where you want it.

The selection changes to match the area around it. The boy is gone, and where he stood is a section of the bridge wall and of a building. The effect was pretty impressive, but not quite perfect. Repairing areas with the Clone Stamp tool The Clone Stamp tool uses pixels from one area of an image to replace the pixels in another part of the image. Using this tool, you can not only remove unwanted objects from your images, but you can also fill in missing areas in photographs you scan from damaged originals.

Make sure that the Aligned option is selected. Move the Clone Stamp tool to an area where the top of the bridge wall is smooth. When you press Alt or Option, the pointer appears as target cross-hairs. Drag the Clone Stamp tool across the top of the bridge wall in the patched area to even it out, and then release the mouse button. Each time you click the Clone Stamp tool, it begins again with a new source point, in the same relationship to the tool as the first stroke you made.

That is, if you begin painting further right, it samples from stone that is further right than the original source point. Deselect Aligned if you want to start from the same source point each time. Select a source point where the bottom of the bridge wall is even, and then drag the Clone Stamp tool across the bottom of the wall where you patched it.

Select a smaller brush size, and deselect Aligned. Then select a source point over the rightmost windows in the lowest row on the building you patched.

Click across to create accurate windows there. Repeat step 6 to make any adjustments you want to apply to the lowest area of the building and the wall that runs in front of it.

If you like, you can use a smaller brush size to touch up the stones in the patched portion of the wall. Save your work. Sharpening the image The last task you might want to do when retouching a photo is to sharpen the image. There are several ways to sharpen an image in Photoshop, but the Smart Sharpen filter gives you the most control. The colored dots you see are artifacts of the scanning process.

The Threshold value determines how dissimilar the pixels should be before they are eliminated. The Radius value determines the size of the area searched for dissimilar pixels. The default values are great for tiny dots of color like the ones in this image.

Now that the artifacts are gone, you can sharpen the image. In the Smart Sharpen dialog box, make sure that Preview is selected, so you can see the effect of settings you adjust in the image window. You can drag inside the preview window in the dialog box to see different parts of the image, or use the plus and minus buttons below the thumbnail to zoom in and out. Make sure Lens Blur is chosen in the Remove menu. Lens Blur provides finer sharpening of detail and reduced sharpening halos.

Gaussian Blur increases contrast along the edges in an image. Motion Blur reduces the effects of blur that resulted from the camera or the subject moving when the photo was taken.

Drag the Radius slider to about 1. The Radius value determines the number of pixels surrounding the edge pixels that affect the sharpening. The higher the resolution, the higher the Radius setting should usually be.

Your image is ready to share or print! Extra credit Converting a color image to black and white You can get great results converting a color image to black and white with or without a tint in Photoshop. Click Open. Adjust the color sliders to change the saturation of color channels.

You can also experiment with options from the preset menu, such as Darker or Infrared. Or, select the tool in the upper left corner of the Adjustments panel, position it over an area you want to adjust, and drag horizontally to lighten or darken that color wherever it appears in the image. We darkened the bike itself and made the background areas lighter. If you want to colorize the entire photo with a single hue, select Tint. What does resolution mean? What does the Crop tool do?

How can you adjust the tone and color of an image in Photoshop? What tools can you use to remove blemishes in an image? How can you remove digital artifacts such as colored pixels from an image?

The term resolution refers to the number of pixels that describe an image and establish its detail. Image resolution and monitor resolution are measured in pixels per inch ppi. Printer, or output, resolution is measured in ink dots per inch dpi. You can use the Crop tool to trim, scale, or straighten an image. To adjust the tone and color of an image in Photoshop, first use the White Point tool in a Curves adjustment layer.

Then refine the tone using a Levels adjustment layer. The Clone Stamp tool copies the source area exactly; the Healing Brush and Spot Healing Brush tools blend the area with the surrounding pixels. In Content-Aware mode, the Patch tool replaces a selection with content that matches the surrounding area. About selecting and selection tools Making changes to an area within an image in Photoshop is a two-step process.

You first use one of the selection tools to select the part of an image you want to change. Then you use another tool, filter, or other feature to make changes, such as moving the selected pixels to another location or applying a filter to the selected area. You can make selections based on size, shape, and color. When a selection is active, changes you make apply only to the selected area; other areas are unaffected.

There are four primary types of selections: Geometric selections The Rectangular Marquee tool selects a rectangular area in an image. The Elliptical Marquee tool , which is hidden behind the Rectangular Marquee tool, selects elliptical areas. The Single Row Marquee tool and Single Column Marquee tool select either a 1-pixel-high row or a 1-pixel-wide column, respectively. Freehand selections The Lasso tool traces a freehand selection around an area.

The Polygonal Lasso tool sets anchor points in straight-line segments around an area. The Magnetic Lasso tool works something like a combination of the other two lasso tools, and gives the best results when good contrast exists between the area you want to select and its surroundings.

Color-based selections The Magic Wand tool selects parts of an image based on the similarity in pixel color. It is useful for selecting odd-shaped areas that share a specific range of colors. In the Favorites panel, click the Lessons folder. Then double-click the Lesson03 folder in the Content panel to see its contents.

Study the 03End. Move the thumbnail slider to the right if you want to see the image in more detail. The project is a shadowbox that includes a piece of coral, a sand dollar, a mussel, a nautilus, and a plate of small shells. The challenge in this lesson is to arrange these elements, which were scanned together on the single page you see in the 03Start. Double-click the 03Start.

Using the Quick Selection tool The Quick Selection tool provides one of the easiest ways to make a selection. You simply paint an area of an image, and the tool automatically finds the edges. You can add or subtract areas of the selection until you have exactly the area you want. The image of the sand dollar in the 03Working. Select the Zoom tool in the Tools panel, and then zoom in so that you can see the sand dollar well. Select the Quick Selection tool in the Tools panel. Select Auto-Enhance in the options bar.

When Auto-Enhance is selected, the Quick Selection tool creates better quality selections, with edges that are truer to the object. The selection process is a little slower than using the Quick Selection tool without Auto-Enhance, but the results are superior. Click on an off-white area near the outside edge of the sand dollar.

The Quick Selection tool finds the full edge automatically, selecting the entire sand dollar. Leave the selection active so that you can use it in the next exercise. The rest of the image is not affected by those changes. To move the selected area to another part of the composition, you use the Move tool.

This image has only one layer, so the pixels you move will replace the pixels beneath them. If the sand dollar is not still selected, repeat the previous exercise to select it. Zoom out so you can see both the shadowbox and the sand dollar. Select the Move tool. Notice that the sand dollar remains selected. Unless a selection tool is active, clicking elsewhere in the image will not deselect the active area. The layers that are under the pointer appear in the context menu.

Manipulating selections You can move selections, reposition them as you create them, and even duplicate them. One of the most useful things you may find in this section is the introduction of keyboard shortcuts that can save you time and arm motions.

Repositioning a selection marquee while creating it Selecting ovals and circles can be tricky. As you perform this exercise, be very careful to follow the directions about keeping the mouse button or specific keys pressed. If you accidentally release the mouse button at the wrong time, simply start the exercise again from step 1. Select the Elliptical Marquee tool , hidden under the Rectangular Marquee tool. Move the pointer over the plate of shells, and drag diagonally across the oval plate to create a selection, but do not release the mouse button.

If you accidentally release the mouse button, draw the selection again. In most cases— including this one—the new selection replaces the previous one. Still holding down the mouse button, press the spacebar, and continue to drag the selection. Position it so that it more closely aligns with the plate. Carefully release the spacebar but not the mouse button and continue to drag, trying to make the size and shape of the selection match the oval plate of shells as closely as possible.

If necessary, hold down the spacebar again and drag to move the selection marquee into position around the plate of shells. When the selection border is positioned appropriately, release the mouse button. Leave the Elliptical Marquee tool and the selection active for the next exercise. If the plate of shells is not still selected, repeat the previous exercise to select it.

The pointer icon now includes a pair of scissors to indicate that the selection will be cut from its current location. Note You can release the Ctrl or Command key after you start dragging, and the Move tool remains active. Photoshop reverts to the previously selected tool when you deselect, whether you click outside the selection or use the Deselect command.

Moving a selection with the arrow keys You can make minor adjustments to the position of selected pixels by using the arrow keys. You can nudge the selection in increments of either one pixel or ten pixels. When a selection tool is active in the Tools panel, the arrow keys nudge the selection border, but not the contents.

When the Move tool is active, the arrow keys move both the selection border and its contents. Before you begin, make sure that the plate of shells is still selected in the image window. Press the Up Arrow key on your keyboard a few times to move the oval upward. Notice that each time you press the arrow key, the plate of shells moves one pixel. Experiment by pressing the other arrow keys to see how they affect the selection. Hold down the Shift key as you press an arrow key. When you hold down the Shift key, the selection moves ten pixels every time you press an arrow key.

Sometimes the border around a selected area can distract you as you make adjustments. Either command hides the selection border around the plate of shells. Using the Magic Wand tool The Magic Wand tool selects all the pixels of a particular color or color range. As with many of the selection tools, after you make the initial selection, you can add or subtract areas of the selection. The Tolerance option sets the sensitivity of the Magic Wand tool. This value limits or extends the range of pixel similarity.

The default tolerance value of 32 selects the color you click plus 32 lighter and 32 darker tones of that color. You may need to adjust the tolerance level up or down depending on the color ranges and variations in the image. If a multicolored area that you want to select is set against a background of a different color, it can be much easier to select the background than the area itself. Select the Rectangular Marquee tool , hidden behind the Elliptical Marquee tool. Drag a selection around the piece of coral.

Make sure that your selection is large enough so that a margin of white appears between the coral and the edges of the marquee.

At this point, the coral and the white background area are selected. Select the Magic Wand tool , hidden under the Quick Selection tool. In the options bar, confirm that the Tolerance value is This value determines the range of colors the wand selects.

Click the Subtract From Selection button in the options bar. A minus sign appears next to the wand in the pointer icon. Anything you select now will be subtracted from the initial selection. Click in the white background area within the selection marquee. The Magic Wand tool selects the entire background, subtracting it from the selection. Now all the white pixels are deselected, leaving the coral perfectly selected.

Softening the edges of a selection To smooth the hard edges of a selection, you can apply anti-aliasing or feathering, or use the Refine Edge option. Anti-aliasing smooths the jagged edges of a selection by softening the color transition between edge pixels and background pixels.

Since only the edge pixels change, no detail is lost. Anti-aliasing is useful when cutting, copying, and pasting selections to create composite images. Select the tool to display its options in the options bar. To apply anti-aliasing, you must select the option before making the selection. Once a selection is made, you cannot add anti- aliasing to it. Feathering blurs edges by building a transition boundary between the selection and its surrounding pixels. This blurring can cause some loss of detail at the edge of the selection.

You can define feathering for the marquee and lasso tools as you use them, or you can add feathering to an existing selection. Feathering effects become apparent when you move, cut, or copy the selection. You can use the Refine Edge option to smooth the outline, feather it, or contract or expand it. Enter a Feather value in the options bar.

This value defines the width of the feathered edge and can range from 1 to pixels. Enter a value for the Feather Radius, and click OK. Selecting with the lasso tools As we mentioned earlier, Photoshop includes three lasso tools: the Lasso tool, the Polygonal Lasso tool, and the Magnetic Lasso tool.

You can use the Lasso tool to make selections that require both freehand and straight lines, using keyboard shortcuts to move back and forth between the Lasso tool and the Polygonal Lasso tool.

Make sure you can see the entire mussel in the window. Do not release the mouse button. Press the Alt Windows or Option Mac OS key, and then release the mouse button so that the lasso pointer changes to the polygonal lasso shape.

Do not release the Alt or Option key. Begin clicking along the end of the mussel to place anchor points, following the contours of the mussel. Be sure to hold down the Alt or Option key throughout this process. The selection border automatically stretches like a rubber band between anchor points. When you reach the tip of the mussel, hold down the mouse button as you release the Alt or Option key.

The pointer again appears as the lasso icon. Carefully drag around the tip of the mussel, holding down the mouse button. When you finish tracing the tip and reach the lower side of the mussel, first press Alt or Option again, and then release the mouse button.

Click along the lower side of the mussel with the Polygonal Lasso tool as you did on the top. Continue to trace the mussel until you arrive back at the starting point of your selection near the left end of the image. Click the starting point of the selection, and then release Alt or Option. The mussel is now entirely selected. Leave the mussel selected for the next exercise. Note To make sure that the selection is the shape you want when you use the Lasso tool, end the selection by dragging across the starting point of the selection.

If you start and stop the selection at different points, Photoshop draws a straight line between the start and end points of the selection.

Before you begin, make sure that the mussel is still selected. The mussel and selection marquee are enclosed in a bounding box. Move the pointer outside the bounding box so that it becomes a curved, double- headed arrow. Drag to rotate the mussel to a degree angle. You can verify the angle in the Rotate box in the options bar. Press Enter or Return to commit the transformation. If necessary, select the Move tool and drag to reposition the mussel, leaving a shadow to match the others.

Selecting with the Magnetic Lasso tool You can use the Magnetic Lasso tool to make freehand selections of areas with high- contrast edges. When you draw with the Magnetic Lasso tool, the selection border automatically snaps to the edge between areas of contrast. You can also control the selection path by occasionally clicking the mouse to place anchor points in the selection border.

Select the Magnetic Lasso tool , hidden under the Lasso tool. Click once along the left edge of the nautilus, and then move the Magnetic Lasso tool along the edge to trace its outline.

Tip In low-contrast areas, you may want to click to place your own fastening points. You can add as many as you need. To remove the most recent fastening point, press Delete, and then move the mouse back to the remaining fastening point and continue selecting.

When you reach the left side of the nautilus again, double-click to return the Magnetic Lasso tool to the starting point, closing the selection. Or you can move the Magnetic Lasso tool over the starting point and click once.

Double-click the Hand tool to fit the image in the image window. Make sure that you can see the entire screw head in your image window. Select the Elliptical Marquee tool in the Tools panel. Move the pointer to the approximate center of the screw. Click and begin dragging. Then, without releasing the mouse button, press Alt Windows or Option Mac OS as you continue dragging the selection to the outer edge of the screw. The selection is centered over its starting point.

When you have the entire screw head selected, release the mouse button first, and then release Alt or Option and the Shift key if you used it. Tip To select a perfect circle, press Shift as you drag. Hold down Shift while dragging the Rectangular Marquee tool to select a perfect square. If necessary, reposition the selection border using one of the methods you learned earlier. Before you begin, make sure that the screw is still selected.

Select the Move tool in the Tools panel. Position the pointer within the screw selection. The pointer becomes an arrow with a pair of scissors , indicating that dragging the selection will cut it from its current location and move it to the new location. Drag the screw onto the lower right corner of the shadowbox. A bounding box appears around the selection. Then press Enter or Return to commit the change and remove the transformation bounding box. As you resize the object, the selection marquee resizes, too.

Use the Move tool to reposition the screw after resizing it, so that it is centered in the corner of the shadowbox frame. Moving and duplicating a selection simultaneously You can move and duplicate a selection at the same time. If the screw is no longer selected, reselect it now, using the techniques you learned earlier. The pointer changes, displaying the usual black arrow and an additional white arrow, which indicates that a duplicate will be made when you move the selection.

Continue holding down the Alt or Option key as you drag a duplicate of the screw straight up to the top right corner of the frame. Pressing the Shift key as you move a selection constrains the movement horizontally or vertically in degree increments.

Repeat step 3 to drag a fourth screw to the lower left corner of the frame. Copying selections You can use the Move tool to copy selections as you drag them within or between images, or you can copy and move selections using the Copy, Copy Merged, Paste, and Paste Into commands.

Dragging with the Move tool saves memory, because the clipboard is not used as it is with the commands. The source selection is pasted onto a new layer, and the destination selection border is converted into a layer mask. Keep in mind that when a selection is pasted between images with different resolutions, the pasted data retains its pixel dimensions. This can make the pasted portion appear out of proportion to the new image.

Use the Image Size command to make the source and destination images the same resolution before copying and pasting. Select the Crop tool , or press C to switch from the current tool to the Crop tool. Photoshop displays a crop boundary around the entire image. In the options bar, make sure Ratio is selected in the Preset pop-up menu and that there are no ratio values specified. Then confirm that Delete Cropped Pixels is selected. When Ratio is selected but no ratio values are specified, you can crop the image with any proportions.

Drag the crop handles so that the shadowbox is in the highlighted area, omitting the backgrounds from the original objects at the bottom of the image. Tip To crop an image with its original proportions intact, choose Original Ratio from the Preset pop-up menu in the options bar.

The shadowbox is complete! How do you add to and subtract from a selection? What does the Quick Selection tool do? How does the Magic Wand tool determine which areas of an image to select? What is tolerance, and how does it affect a selection? Only the area within an active selection can be edited. To add to a selection, click the Add To Selection button in the options bar, and then click the area you want to add. To subtract from a selection, click the Subtract From Selection button in the options bar, and then click the area you want to subtract.

You can also add to a selection by pressing Shift as you drag or click; to subtract, press Alt Windows or Option Mac OS as you drag or click. The Quick Selection tool expands outward from where you click to automatically find and follow defined edges in the image. The Magic Wand tool selects adjacent pixels based on their similarity in color. The Tolerance value determines how many color tones the Magic Wand tool will select.

The higher the tolerance setting, the more tones are selected. This lesson will take less than an hour to complete. Each layer can then be edited as discrete artwork, giving you tremendous flexibility as you compose and revise an image. About layers Every Photoshop file contains one or more layers.

New files are generally created with a background layer, which contains a color or an image that shows through the transparent areas of subsequent layers. All new layers in an image are transparent until you add text or artwork pixel values. Working with layers is analogous to placing portions of a drawing on clear sheets of film, such as those viewed with an overhead projector: Individual sheets may be edited, repositioned, and deleted without affecting the other sheets.

When the sheets are stacked, the entire composition is visible. When prompted, click Yes to delete the Adobe Photoshop Settings file. Then double-click the Lesson04 folder in the Content panel to see its contents. Study the 04End.

This layered composite represents a postcard. You will create it in this lesson as you learn how to create, edit, and manage layers. Double-click the 04Start. Saving another version of the start file frees you to make changes without worrying about overwriting the original.

Using the Layers panel The Layers panel lists all the layers in an image, displaying the layer names and thumbnails of the content on each layer. You can use the Layers panel to hide, view, reposition, delete, rename, and merge layers. The layer thumbnails are automatically updated as you edit the layers. The Layers panel lists five layers for the 04Working. If you click the eye, the image window no longer displays that layer. The first task for this project is to add a photo of the beach to the postcard.

Tip Use the context menu to hide or resize the layer thumbnail. Right-click Windows or Control-click Mac OS a thumbnail in the Layers panel to open the context menu, and then choose a thumbnail size.

The Layers panel changes to display the layer information for the active Beach. Notice that only one layer appears in the Beach. An image can have only one background layer. You cannot change the stacking order of a background layer, its blending mode, or its opacity.

You can, however, convert a background layer to a regular layer. To convert a background layer into a regular layer: 1. Click the lock icon next to the layer name.

Rename the layer. Learn to easily reuse design assets and share them with your team using Creative Cloud libraries with Linked Smart Objects, and instantly modify duplicated content using the enhanced Content Aware Move tool.

Design screens more efficiently for the range of display sizes across desktop and mobile devices using multiple Artboards, test them on actual hardware using Device Preview, and generate output using the iteration-friendly Export Assets workflow. The online companion files include all the necessary assets for readers to complete the projects featured in each chapter as well as ebook updates when Adobe releases new features for Creative Cloud customers.

And new to this release, all buyers of the book get full access to the Web Edition: a Web-based version of the complete ebook enhanced with video and interactive multiple-choice quizzes. As always with the Classroom in a Book, Instructor Notes are available for teachers to download. Lesson 8, “Tracing a shape from a photo”, page Please skip step 3 and go directly from step 2 to step 4.

Lesson 8, “Adding a second shape to a path”, page Step 2 should read, “Make sure the Pen tool and the shape you just drew are selected and that Subtract Front Shape is selected in the Path Operations pop-up menu in the options bar. I would like to receive exclusive offers and hear about products from Adobe Press and its family of brands.

I can unsubscribe at any time. Pearson Education, Inc. This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:. For inquiries and questions, we collect the inquiry or question, together with name, contact details email address, phone number and mailing address and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes. Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing.

Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email ask peachpit. On rare occasions it is necessary to send out a strictly service related announcement.

For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information.

However, these communications are not promotional in nature. We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users’ wishes when a user submits their information through our Contact Us form.

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site.

While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson but not the third party web trend services to link information with application and system log data.

Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising.

Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider.

Marketing preferences may be changed at any time. If a user’s personally identifiable information changes such as your postal address or email address , we provide a way to correct or update that user’s personal data provided to us.

This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service informit. Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list s simply visit the following page and uncheck any communication you no longer want to receive: www.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest pearson.

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice.